You are here:Home > Building Products > Timber > AST Timber Floors

WHY CHOOSE AST TIMBER FLOORING?

  • Tough, hardwearing, natural, sustainable and carbon storage positive in its lifecycle
  • AST TimberLay flooring products are seasoned by the power of the sun, a completely natural, energy efficient and environmentally friendly process
  • Derived from renewable sources promoting sustainable forest management
  • Manufactured by an AFCS Chain of Custody certificate holder (AFS/01-31-10 and PEFC/21-31-10)
  • Choose from 9 different species and 2 different grades 
  • Our flooring is not pre-finished with surface coatings allowing individual choice from the full range of oil, water or solvent based finishes that are available
  • Cost effective without compromising quality
  • Low antistatic and dust properties – better for avoiding allergies and asthma
  • Adds a natural warmth, character, unique style and value compared with other floor coverings
  • Easy to clean and maintain

 

 afs-pefc-logo  
                                                                                               
ast-logo-jpegsm


For further information on AST Timber flooring:

Timber colour variation
Timber is a natural product and each log is unique in colour and character. Even within one species there will be natural variations. Some species will exhibit small variations while others vary greatly from log to log and within the log. It should be remembered no matter how big a sample of a species you have seen they are only indicative of the species colour and natural variation that may be expected. Your floor will be different from these samples and totally unique to you in its beauty.

 

Pearl Beech - Cream to pale brown - Narrow Grain

coastal-blackbutt Coastal Blackbutt - Honey Brown to Cream - Fine Grain
 

Brushbox - Deep red Brown to Charcoal Grey - Fine grain

spotted-gum

Spotted Gum - Coffee brown to cream - Wide grain

  Copper Cherry - Blend of reds to red brown - Narrow Grain
 

Iron bark - Chocolate brown to slate grey - Wide grain

General guidelines for grading to Australian Standards

At AST our flooring products are manufactured and graded by experienced graders in accordance with Australian Standard 2796.2 - 2006 “ Timber – Hardwood – Sawn and Milled Products”.In April 2001 AST became one of the first hardwood processors in NSW to qualify for membership of the prestigious Hardwood Quality Certification Scheme administered by the independent certification organization Australian Timber Industry Certification (ATIC). The registered ATIC trademark on our product packaging and documentation signifies that our flooring has been manufactured under ATIC’s rigorous quality control program and that it is certified to comply with the specific grade.

light_feature
1. Select As per “Select Grade” description in AS 2796.2 - 2006this grade is ideal for use in formal living and reception areas or in commercial developments where a uniform and consistent appearance is required.*
 moderate_feature  2. Standard As per “Medium Feature Grade” description in AS 2796.2 - 2006deliberately selected to show a limited amount of interesting natural growth characteristics like tight gum veins, tight knots and insect marks, a moderate feature floor provides a subtle reminder of the timber’s natural forest origins. It is a popular and practical choice for family, living and rumpus rooms, as well as bedrooms and office spaces where the occasional scuffs and minor scratches caused by daily foot traffic are better disguised amongst the random features in the timber.*
 full_feature 3. Feature As per “High Feature Grade” description in AS 2796.2 - 2006 Full feature floors have lots of interesting natural growth features dispersed throughout the timber displaying a variety of permissible features and because of this provides a unique looking floor which works well in high traffic areas in residential and industrial buildings and in any room where a relaxed warm rustic look is sought.*

 

Our flooring is not pre-finished with surface coatings allowing customers to choose from the full range of available oil, water or solvent-based finishes. From low sheen to high gloss you can achieve the effect you’re looking for with an AST timber floor.

 

  pdf ast_installers_guide_14_mm_july_2008 242.24 Kb

 

Gunnersen flooring range
 Dimensions Cover Width
 80, 85 & 130mm
  Thickness
 14 & 19mm
   Length  0.9m - 5.7m
 Grades  Select
 
   Standard  
   Feature  
Pack Sizes
Width 520mm
  Height 400mm
 Linear Metres (per pack)
Pinnacle
500 - 520
 

 Pinnacle

330 - 350
  Affinity 340 - 360

AVAILABILITY
SPECIES GRADES SIZES LENGTHS
Coastal Blackbutt
Select & Standard

85 x 14

80 x 19

R-900mm – 5.7m
Copper Cherry
Select & Standard & Feature 85 x 14 R-900mm – 5.7m
Ironbark Select & Standard 80 x 14 R-900mm – 5.7m
Pearl Beech
Select & Standard

85 x 14

80 x 19
R-900mm – 5.7m
Spotted Gum
Select & Standard & Feature

85 x 14

80 x 19

130 x 19

R-900mm – 5.7m
Brushbox Select & Standard 80 x 19 R-900mm – 5.7m

While AST makes every effort to identify it's species as true to label as possible packs may contain a minimal proportion of other similar species.

 

Brochures 

Click the brochures or samples tab of the product you would like more information about.

Timber Flooring Brochure

Request Brochure:

Download File
(PDF - 1.61 MB)


Request Brochures

Email:
AST Timber Floors" />
MAKE AN ENQUIRYCLICK HERE

CLOSE FORM

New catalogue out now
Where to buy