ColourPyne
Practical and versatile at an economical price point; ColourPyne® is a decorative board product for kitchen, bathroom and laundry cabinetry, wardrobes, general shelving and much more.
COLOURpyne with its melamine technology is a tough, scratch-resistant surface that is designed specifically for vertical surfaces such as kitchen cabinets, cupboard doors, pantries, vanities, wardrobes, furniture, mobile storage units, general shelving and more.
The COLOURpyne range features a palette of contemporary and classic prints from solid and special laminate colours to authentic woodgrains. Changing the look of your colours can be as simple as changing the surface finish. Choose from two finishes available in the COLOURpyne® range – Velvet and Decor
Practical, versatile and hard-wearing, ColourPyne® is a tough surface which can be used on cupboards, shelves, pantries and cabinets, storage units, bathroom cabinetry, laundry cabinets, wardrobes, general shelving, and much more. The ColourPyne® range features a palette of contemporary and classic prints from solid and special colours to authentic wood grains. Changing the look of your colours can be as simple as changing the surface finish.
FINISHES AVAILABLE
VELVET: Delicate eggshell surface
DÉCOR: Lightly textured, orange-peel like surface
Note: Not all colours are available in both finishes.
EDGE FINISHING
ColourPyne board can be finished with Melamine or rigid
edge tape.
LIMITATIONS
ColourPyne should not be used in areas where it will be
exposed to high moisture levels, for example, as wall
linings for exteriors, for wet areas in regular contact with
water, or for benchtops in kitchens and bathrooms.
CARE AND CLEANING
Keeping your ColourPyne surfaces clean is easy. Regular
cleaning simply involves wiping with a clean, damp cloth.
For spills and stains it is important to catch the stain early.
Wiping it with hot soapy water is the first thing to try. Never
use abrasive cleaners, wire wool scourer pads, copper
cleaner pads or sandpaper on your ColourPyne surfaces.
| 1200 Range |
Nominal Finished Thickness (mm) | ||
| Substrate | Sheet Size | 16 | 18
|
| Moisture Resistant Particleboard | 2400 x 1200 mm | a | a |
| Standard MDF | 2400 x 1200 mm | a | a |
| Moisture Resistant MDF | 2400 x 1200 mm | a | a |
| 1800 Range | Nominal Finished Thickness (mm) | |||||
| Substrate | Sheet Size | 16 | 18 | 25 | 32 | 33 |
| Standard Particleboard |
3600 x 1800 mm 2400 x 1800mm |
a |
a |
a | ||
| Moisture Resistant Particleboard | 2400 x 1800 mm | a | a |
a |
a | |
| Moisture Resistant Particleboard | 3600 x 1800 mm | a | a | a | ||
| Standard MDF | 2400 x 1800 mm | a | a | a |
a |
|
Please note some substrates, colours and sizes have longer lead times and minimum quantities, contact your nearest Gunnersen branch for more details.
Further Information on ColourPyne:
Tech Info
Restrictions on Use
Colourpyne should not be used in areas where it will be exposed to high moisture levels. For example, as wall linings for exteriors, for wet areas in regular contact with water, or for benchtops in kitchens and bathrooms.
Edge Finishing
Colourpyne board can be finished with Melamine or rigid edgetape.
Cleaning & Care Instructions
Keeping your Colourpyne surfaces clean is easy. Regular cleaning simply involves wiping with a clean damp cloth. For spills and stains the most important thing is to catch the stain early. Wiping it with a hot soapy water is the first thing to try. Never use abrasive cleaners, wire wool scourer pads, copper cleaner pads or sandpaper on your Colourpyne surfaces.
Certification and compliance
Formaldehyde emissions meet the E1 standards of <1.5 mg/L (Particleboard substrate) and > 1.0 mg/L (MDF substrate), when tested in accordance with AS/NZS 4266.16:2004 – test method 16. E0 (E zero) Colourpyne (<0.5 mg/L) is also available (note: minimum order quantities may apply).
Green Star environmental ratings – both E1 and E0 are eligible to earn points under the Indoor Environment Quality section of the Green Star Office Interiors program. Click here to access a declaration that can be used for Green Star audit purposes.
For general facts about Particle board and MDF products, including mechanical, physical and moisture properties, a useful source of information is the EWPA 'Facts about PB and MDF'.
For more information, please download pdf files.
 |
 |
 |
 |
 |
Brochures
Click the brochures or samples tab of the product you would like more information about.
