Zenolite
Zenolite™ is a multi-purpose product that gives a superior high gloss glass appearance without the installation restrictions and cost of glass, or the design limitations of aluminium.
For residential and commercial applications Zenolite™ can provide a sleek and modern finish. Available in 9 colours, it is a simple, easy and cost effective way to give your kitchen, bathroom and office a new designer look.
Zenolite™ can be cut and shaped easily; it is durable and long lasting and maintains its superior sheen with minimal cleaning. Its painted design can withstand commercial applications as it has 25 times the impact strength of glass.
|
FEATURES
|
APPLICATIONS
RESIDENTIAL
|
LIMITATIONS
Zenolite™ is not recommended where a direct heat source is applied such as behind cook tops.
Zenolite is not recommended for use in shower recesses.
CLEANING
- To clean simply use a diluted solution of a non abrasive detergent and a soft cloth
- To remove, use a new cloth in a gentle circular motion (while still damp)
Please refer to the zenolite__polishing_guide_ for more details.
For further information on Zenolite:
Colours
- Please click the checkbox of the sample(s) you would like to request and proceed to the bottom of the page.
- Enter your email address in the space provided and we will send your samples promptly.
Please note there is a maximum of 5 samples per order.
You may only request samples for one particular product at a time.
To order more samples of other products please repeat this process.
Request Samples
|
Standard Sheet Sizes |
||
| Width (mm) | Length (mm) | Thickness (mm) |
|
1240 |
2465 |
6 |
| 1240 |
3690 |
6 |
| Physical properties | |||||
|
Properties |
Metric US |
US |
|||
| Properties | Test | Result |
Unit |
Result |
Unit |
| Specific Gravity | ASTM D-792 |
1.19 | _ | 1.19 | |
| Water Absorption |
ASTM D-570 |
< 0.5% |
< 0.5% | ||
| Diagonal Difference | < 4 | mm | <0.16 | in | |
| Thickness | 6 | mm | 0.24 | in | |
| Tensile Strength, Max | ASTM D-638 | 70 | MPa | 10,000 | psi |
| Elongation at Break | ASTM D-638 | 4% | 4% | ||
| Tensile Modulus | ASTM D-638 | 3000 | MPa | 435,000 | psi |
| Flexural Strength | ASTM D-790 | 100 | MPa | 15,000 | psi |
| Flexural Modulus | ASTM D-790 | 3000 | MPa | 435,000 | psi |
|
Izod Impact Strength, Milled Notch |
ASTM D-256 | 15 | J/m | 0.28 | ft/lbs.in |
| Abrasion (Taber, 10 rots. CS10F 500g) | ASTM D-1044 | 11% | Haze | 11% | Haze |
| HDT, 264psi, 1.82MPa | ASTM D-648 | 96 | °C | 203 | °F |
| Specific Heat Capacity |
1.47 | J/ gK |
0.35 | BTU/lb-°F | |
| CTE, -30 to 30C |
ASTM D-696 |
7 |
mm/(mm.°C) x10 -5 |
4 |
in/(in.°F)
x10 -5 |
| Thermal Conductivity |
ASTM C-177 |
0.18 | W/mK | 1.25 | BTU-in/hr-ft2-°F |
| Continuous service temperature | 77 | °C | 170 | °F | |
| max temperature, short term |
95 | °C | 202 | °F | |
| Degradation Temperature |
> 275 |
°C | > 530 | °F | |
| Flame Spread |
ASTM E84 |
> 120 1- |
> 120 1- | ||
| Hazard Test to AS 1530.3.1999 |
|||||
| Ignitability Index (Range 0 - 20) |
13 | ||||
| Spread of Flame Index (Range 0 - 10) |
7 | ||||
| Heat Evolved index (Range 0 - 10) |
7 | ||||
| Smoke Developed Index (Range 0 - 10) |
4 | ||||
TECHNICAL
Please refer to the MSDS for more information.
msds_zenolite_2006
CUSTOMISATION
Zenolite™can be made to order. This means that colour choice is endless and we can match new designs or existing backgrounds on demand.
Custom sizes of up to 5000mm x 2050mm, and customised colours are available upon request and subject to minimum order quantities.
Brochures
Click the brochures or samples tab of the product you would like more information about.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |