Linear Series Wet Area Panelling - Wall Panelling - Wood Panels, Timber & Decorative Surface Products, Gunnersen Australia

Description

7-year-limited-warranty-logo50-x-50

The WallART Linear Series is a wet area panelling solution available in a range of attractive colours and patterns.

Water Resistant

The Linear Series is double-sided and perfect for any indoor space that collects moisture, including the bathroom, kitchen, laundry and shower recess.

Durable

Made from high-pressure laminate it can withstand impact far greater than ceramic tiles, and will not chip, discolour or fade. Being non-porous allows it to perform even in humid conditions like shower recesses.

Hygienic

The Linear Series will not attract mould because it is grout-free. This also makes cleaning a breeze - simply wipe with a damp cloth and non-abrasive cleanser.

Stylish

The Linear Series offers you a range of attractive styles, from classic monochromes to contemporary patterns - all with joiners to match. Its streamlined finish makes it a versatile alternative to conventional tiles or splashbacks.

Further Information on WallART Linear Series:

Samples

Colours

Please click the checkbox of the sample(s) you would like to request and proceed to the bottom of the page.
Enter your email address in the space provided and we will send your samples promptly.

Please note there is a maximum of 5 samples per order.
You may only request samples for one particular product at a time.
To order more samples of other products please repeat this process.

Request Samples

Sizes/Specs

Sheet Size	2400 x 1200 mm 2400 x 900 mm 2100 x 900 mm
Thickness	3.0 mm (tolerance ±0.2 mm)
Finish	Gloss
Weight	4.35 kg/m2
Density	1450 kg/m3

wallart_linear_series_msds 46.45 Kb

Joiners

Joiner Profiles

Linear Series Joiner Profiles

Joiner Colour Chart

Installation

The WallART Linear Series is simple to install. Our easy-to-follow installation guide enables you to give your space a professional look at just a fraction of the cost, without the need for backing materials.

Safety First
When working in areas that generate dust it is advisable that you wear protective goggles, a dust mask and work gloves. Storage and work areas should be well ventilated.

Conditioning
It is important that you condition your panels by placing them in the room where they will be installed. Leave a space between sheets to allow for air circulation. For rooms above ground level, allow panels to condition for 24 hours. For rooms below ground level, allow for 48 hours.

Handling
To avoid scratching the surface of your panels, ensure that the work area remains clean, avoid contact between the panel and abrasive surfaces and take care when moving the panel to avoid chipping any edges.

Planning and Preparation
Calculate the number of panels required to complete your project and gather the necessary tools and materials from the following list:

Tape measure
Spirit level
Pencil
Carpenter's square
Fine tooth handsaw or fine tipped tungsten machine saw
Fine tooth hacksaw
Hand plane
Sandpaper
Timber battens
Electric drill & hole cutting bit
Nails
Hammer
Staple gun
Caulking gun
Adhesive (we recommend a synthetic rubber based adhesive. Rigid or semi-rigid adhesive is not recommended)
Sealant (we recommend Selley's All Clear or Selley's Bathroom & Kitchen Sealant)
Caulking compound (we recommend Selley's Bathroom & Kitchen Silicone)
Wood block / cloth
Mineral spirits
Colour-matched joiners to join panels and finish off installation

Tech Info

Care and Maintenance

To maintain its original lustre, panels should be cleaned with a mild liquid non-abrasive cleanser. Avoid using abrasive powder cleansers.

The WallART Linear Series is tested and approved to international standard ISO 4586 for high-pressure laminate.

Gallery

Brochures

Click the brochures or samples tab of the product you would like more information about.