Rezilience Wall Panelling

WallART Rezilience is a cost effective alternative to staining and painting interior walls. Combining fashion and function, Rezilience offers the latest technological advances in wall panelling materials by providing a hard wearing and stain resistant surface.

The WallART Rezilience range of interior wall panelling is a cost effective alternative to painting and staining, and has been developed to suit both contemporary and traditional tastes in design. It lets you highlight or disguise architectural features, enhance your furniture or enlarge the look of your room (it is also great for hiding cracked walls or problem areas).

Hard wearing and stain resistant, WallART Rezilience is suitable for:

Houses
Apartments
Compact living spaces
Reception areas
Hotels
High wear areas
Other residential or commercial projects
Caravans
Park homes
Motor homes
Annexes
Holiday cabins

It is suitable for the following applications:

Wall features
Dado walls
Feature walls
Entire rooms

Further Information on WallART Rezilience:

Colours

Please click the checkbox of the sample(s) you would like to request and proceed to the bottom of the page.
Enter your email address in the space provided and we will send your samples promptly.

Please note there is a maximum of 5 samples per order.
You may only request samples for one particular product at a time.
To order more samples of other products please repeat this process.

Request Samples

Joiners


Classic Blonde	Flecked Maple	Renoir Beech	Spiced Walnut

Tuscan Suede	Blue Suede	Suede Moss	Precious Pearl

Profiles Joiner_profiles

Sheet Size	2440 x 1220 mm
Thickness	2.7 mm (tolerance ±0.2 mm)
Substrate	Interior Grade Plywood

Brochures

Click the brochures or samples tab of the product you would like more information about.

Care and Maintenance

CARE AND MAINTENANCE
A damp cloth will remove most marks or spills. For more stubborn marks or spills use warm water and a good quality general-purpose cleanser. We recommend Ajax Spray & Wipe or Jif Powerspray. Avoid using abrasive cleansers, citrus-based products, scouring pads or scrubbing brushes, as they will damage the finish of your panels. Streaks may sometimes show on panels after cleansing. Should this occur, wipe with a general-purpose cleanser then simply rub dry with a clean, dry cloth for a better result.

STAIN RESISTANCE

WallART Rezilience vs Standard Plywood Panels

HOUSEHOLD ITEM	LEVEL OF STAINING		HOUSEHOLD ITEM	LEVEL OF STAINING
HOUSEHOLD ITEM	Standard	Rezilience	HOUSEHOLD ITEM	Standard	Rezilience
Acetone	Moderate	None	Nail polish remover	Moderate	None
Blu-Tac	Some	None	Red food dye	Some	None
Distilled vinegar	Some	None	Shoe polish (black)	Moderate	None
Fountain pen ink	Some	None	Solvent based marker	Moderate	None
Household ammonia	Some	None	Sticky tape	Moderate	None
Household soap	Some	None	Tap water	Some	None
Lipstick	Some	None	Tomato Sauce	Some	None
Mustard	Some	None	Wax Crayon	Moderate	None

WARRANTY
A 12-month warranty applies to WallART Rezilience panels.

N.B. WallART Rezilience is not to be used as a splashback.

Installation
WallART Rezilience is the perfect panel for DIY projects. It requires no special skills and is simple to install - cut, sand, nail and glue. Panels can be applied directly onto studs, plaster or masonry walls as long as there is a flat surface to attach them to. Our easy-to-follow installation guide enables you to give your space a designer look in just a fraction of the time.

Safety First
When working in areas that generate dust it is advisable that you wear protective goggles, a dust mask and work gloves. Storage and work areas should be well ventilated.

Conditioning
It is important that you condition your panels by placing them in the room where they will be installed. Leave a space between sheets to allow for air circulation. For rooms above ground level, allow panels to condition for 24 hours. For rooms below ground level, allow 48 hours.

Handling
To avoid scratching the surface of your panels, ensure that the work area remains clean, avoid contact between the panel and abrasive surfaces and take care when moving the panel to avoid chipping any edges.

Planning and Preparation
Calculate the number of panels required to complete your project and gather the necessary tools and materials from the following list:

Tape measure
Spirit level
Pencil
Carpenter's square
Fine tooth handsaw or fine tipped tungsten machine saw
Fine tooth hacksaw
Hand plane
Sandpaper
Timber battens
Electric drill and hole cutting bit
Nails
Hammer
Staple gun
Adhesive (we recommend a synthetic rubber based adhesive. Rigid or semi-rigid adhesive is not recommended)
Wood block / cloth
Pattern-matched joiners to join panels and finish off installation

Technical

For more information, please download the Material Safety Data Sheet (MSDS).

msds_paper_overlay 10.87 Kb

Rezilience Wall Panelling

Further Information on WallART Rezilience:

Latest News